UHMW Polyethylene Bar: 0.5 in Thick, 2.5 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$26.00
/each
Earn 26 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.5 in Thick, 2.5 in x...
Item 55UP51
$26.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2096 |
| Brand | APPROVED VENDOR |
| Minimum Temperature | -70 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Flexural Modulus | 400 MPa |
| Standards | FDA, UL 94 HB |
| Friction Coefficient | 0.15 |
| Plastic Width | 2.5 in |
| Static-Resistant | Not Static-Resistant |
| Impact Strength | 16.0 ft-lb/in |
| Scratch-Resistant | Not Scratch-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Color | White |
| FDA Compliance | FDA Compliant |
| Maximum Temperature | 180 Degrees F |
| Dielectric Strength | 45 kV/mm |
| Shore Hardness | 70 Shore D |
| Material | UHMW Polyethylene |
| Wear Rate | Not Rated |
| Machinability | 100 % |
| Tensile Strength | 4,400 psi |
| Water Absorption | 0.01 % |
| Rockwell Hardness | 90 HRR |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Backing Type | No Backing |
| UV-Resistant | Not UV-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Plastic Length | 24 in |
| Plastic Thickness | 0.5 in |
| Metal Detectable | Not Metal Detectable |
| Plastic Clarity | Opaque |
| Mfr. Model # | BULK-PS-UHMW-765 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 2.5 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good