UHMW Polyethylene Bar: 0.5 in Thick, 2.5 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$16.64
/each
Earn 16 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.5 in Thick, 2.5 in x...
Item 55UP50
$16.64
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2096 |
| Brand | APPROVED VENDOR |
| Minimum Temperature | -70 Degrees F |
| Color | White |
| Material | UHMW Polyethylene |
| Friction Coefficient | 0.15 |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Maximum Temperature | 180 Degrees F |
| Plastic Clarity | Opaque |
| Water Absorption | 0.01 % |
| Standards | FDA, UL 94 HB |
| Plastic Width | 2.5 in |
| Backing Type | No Backing |
| Scratch-Resistant | Not Scratch-Resistant |
| Static-Resistant | Not Static-Resistant |
| Shore Hardness | 70 Shore D |
| Plastic Thickness | 0.5 in |
| Wear Rate | Not Rated |
| FDA Compliance | FDA Compliant |
| Flexural Modulus | 400 MPa |
| Machinability | 100 % |
| Dielectric Strength | 45 kV/mm |
| UV-Resistant | Not UV-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Rockwell Hardness | 90 HRR |
| Plastic Length | 12 in |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Impact Strength | 16.0 ft-lb/in |
| Tensile Strength | 4,400 psi |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Metal Detectable | Not Metal Detectable |
| Mfr. Model # | BULK-PS-UHMW-764 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 2.5 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good