UHMW Polyethylene Bar: 0.5 in Thick, 0.75 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$12.33
/each
Earn 12 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.5 in Thick, 0.75 in...
Item 55UP39
$12.33
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Minimum Temperature | -70 Degrees F |
| FDA Compliance | FDA Compliant |
| Material | UHMW Polyethylene |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Wear Rate | Not Rated |
| Water Absorption | 0.01 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Thickness | 0.5 in |
| Plastic Width | 0.75 in |
| Dielectric Strength | 45 kV/mm |
| Shore Hardness | 70 Shore D |
| Standards | FDA, UL 94 HB |
| Metal Detectable | Not Metal Detectable |
| Maximum Temperature | 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Clarity | Opaque |
| Static-Resistant | Not Static-Resistant |
| Plastic Length | 24 in |
| Backing Type | No Backing |
| Tensile Strength | 4,400 psi |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Color | White |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Flexural Modulus | 400 MPa |
| Friction Coefficient | 0.15 |
| Rockwell Hardness | 90 HRR |
| Impact Strength | 16.0 ft-lb/in |
| Machinability | 100 % |
| UV-Resistant | Not UV-Resistant |
| Mfr. Model # | BULK-PS-UHMW-126 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 0.75 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good