UHMW Polyethylene Bar: 0.5 in Thick, 0.75 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$9.26
/each
Earn 9 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.5 in Thick, 0.75 in...
Item 55UP38
$9.26
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Friction Coefficient | 0.15 |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Shore Hardness | 70 Shore D |
| Standards | FDA, UL 94 HB |
| Metal Detectable | Not Metal Detectable |
| Plastic Thickness | 0.5 in |
| Minimum Temperature | -70 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Material | UHMW Polyethylene |
| Scratch-Resistant | Not Scratch-Resistant |
| Tensile Strength | 4,400 psi |
| Plastic Length | 12 in |
| Color | White |
| Water Absorption | 0.01 % |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Flexural Modulus | 400 MPa |
| FDA Compliance | FDA Compliant |
| UV-Resistant | Not UV-Resistant |
| Wear Rate | Not Rated |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Rockwell Hardness | 90 HRR |
| Impact Strength | 16.0 ft-lb/in |
| Machinability | 100 % |
| Plastic Width | 0.75 in |
| Dielectric Strength | 45 kV/mm |
| Plastic Clarity | Opaque |
| Backing Type | No Backing |
| Mfr. Model # | BULK-PS-UHMW-116 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 0.75 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good