UHMW Polyethylene Bar: 0.5 in Thick, 0.5 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$8.36
/each
Earn 8 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.5 in Thick, 0.5 in x...
Item 55UP35
$8.36
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Dielectric Strength | 45 kV/mm |
| Metal Detectable | Not Metal Detectable |
| Plastic Width | 0.5 in |
| Plastic Clarity | Opaque |
| Friction Coefficient | 0.15 |
| Water Absorption | 0.01 % |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Machinability | 100 % |
| Standards | FDA, UL 94 HB |
| Tensile Strength | 4,400 psi |
| Material | UHMW Polyethylene |
| Minimum Temperature | -70 Degrees F |
| Impact Strength | 16.0 ft-lb/in |
| Color | White |
| Flexural Modulus | 400 MPa |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Rockwell Hardness | 90 HRR |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Scratch-Resistant | Not Scratch-Resistant |
| Wear Rate | Not Rated |
| Plastic Thickness | 0.5 in |
| Plastic Length | 12 in |
| Static-Resistant | Not Static-Resistant |
| Shore Hardness | 70 Shore D |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| FDA Compliance | FDA Compliant |
| Maximum Temperature | 180 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Backing Type | No Backing |
| Mfr. Model # | BULK-PS-UHMW-86 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 0.5 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good