UHMW Polyethylene Bar: 0.375 in Thick, 0.75 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$10.74
/each
Earn 10 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.375 in Thick, 0.75 i...
Item 55UP18
$10.74
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Plastic Width | 0.75 in |
| Material | UHMW Polyethylene |
| FDA Compliance | FDA Compliant |
| Plastic Thickness | 0.375 in |
| Standards | FDA, UL 94 HB |
| UV-Resistant | Not UV-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Water Absorption | 0.01 % |
| Backing Type | No Backing |
| Shore Hardness | 70 Shore D |
| Color | White |
| Static-Resistant | Not Static-Resistant |
| Dielectric Strength | 45 kV/mm |
| Rockwell Hardness | 90 HRR |
| Tensile Strength | 4,400 psi |
| Wear Rate | Not Rated |
| Flexural Modulus | 400 MPa |
| Machinability | 100 % |
| Metal Detectable | Not Metal Detectable |
| Maximum Temperature | 180 Degrees F |
| Impact Strength | 16.0 ft-lb/in |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Minimum Temperature | -70 Degrees F |
| Plastic Length | 24 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Plastic Clarity | Opaque |
| Scratch-Resistant | Not Scratch-Resistant |
| Friction Coefficient | 0.15 |
| Mfr. Model # | BULK-PS-UHMW-125 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 0.75 in, Plastic Thickness 0.375 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good