UHMW Polyethylene Bar: 0.375 in Thick, 0.5 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$9.30
/each
Earn 9 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.375 in Thick, 0.5 in...
Item 55UP15
$9.30
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Flexural Modulus | 400 MPa |
| Metal Detectable | Not Metal Detectable |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Dielectric Strength | 45 kV/mm |
| Plastic Width | 0.5 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Plastic Length | 24 in |
| Plastic Thickness | 0.375 in |
| Plastic Clarity | Opaque |
| Rockwell Hardness | 90 HRR |
| Scratch-Resistant | Not Scratch-Resistant |
| Color | White |
| UV-Resistant | Not UV-Resistant |
| Machinability | 100 % |
| Backing Type | No Backing |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Water Absorption | 0.01 % |
| Standards | FDA, UL 94 HB |
| Tensile Strength | 4,400 psi |
| Wear Rate | Not Rated |
| Friction Coefficient | 0.15 |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Impact Strength | 16.0 ft-lb/in |
| Material | UHMW Polyethylene |
| Maximum Temperature | 180 Degrees F |
| FDA Compliance | FDA Compliant |
| Minimum Temperature | -70 Degrees F |
| Shore Hardness | 70 Shore D |
| Static-Resistant | Not Static-Resistant |
| Mfr. Model # | BULK-PS-UHMW-95 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 0.5 in, Plastic Thickness 0.375 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good