UHMW Polyethylene Bar: 0.375 in Thick, 0.5 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$7.86
/each
Earn 7 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.375 in Thick, 0.5 in...
Item 55UP14
$7.86
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Rockwell Hardness | 90 HRR |
| Plastic Clarity | Opaque |
| Machinability | 100 % |
| Plastic Length | 12 in |
| Material | UHMW Polyethylene |
| UV-Resistant | Not UV-Resistant |
| FDA Compliance | FDA Compliant |
| Plastic Thickness | 0.375 in |
| Shore Hardness | 70 Shore D |
| Metal Detectable | Not Metal Detectable |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Wear Rate | Not Rated |
| Color | White |
| Tensile Strength | 4,400 psi |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Backing Type | No Backing |
| Dielectric Strength | 45 kV/mm |
| Water Absorption | 0.01 % |
| Friction Coefficient | 0.15 |
| Standards | FDA, UL 94 HB |
| Static-Resistant | Not Static-Resistant |
| Scratch-Resistant | Not Scratch-Resistant |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Flexural Modulus | 400 MPa |
| Maximum Temperature | 180 Degrees F |
| Minimum Temperature | -70 Degrees F |
| Impact Strength | 16.0 ft-lb/in |
| Plastic Width | 0.5 in |
| Mfr. Model # | BULK-PS-UHMW-85 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 0.5 in, Plastic Thickness 0.375 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good