UHMW Polyethylene Bar: 0.25 in Thick, 1.25 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$11.35
/each
Earn 11 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 1.25 in...
Item 55UP09
$11.35
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.15 |
| Metal Detectable | Not Metal Detectable |
| FDA Compliance | FDA Compliant |
| Rockwell Hardness | 90 HRR |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Material | UHMW Polyethylene |
| Scratch-Resistant | Not Scratch-Resistant |
| Color | White |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Thickness | 0.25 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Plastic Clarity | Opaque |
| Shore Hardness | 70 Shore D |
| UV-Resistant | Not UV-Resistant |
| Dielectric Strength | 45 kV/mm |
| Minimum Temperature | -70 Degrees F |
| Impact Strength | 16.0 ft-lb/in |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Plastic Length | 24 in |
| Tensile Strength | 4,400 psi |
| Backing Type | No Backing |
| Flexural Modulus | 400 MPa |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Wear Rate | Not Rated |
| Machinability | 100 % |
| Maximum Temperature | 180 Degrees F |
| Water Absorption | 0.01 % |
| Standards | FDA, UL 94 HB |
| Plastic Width | 1.25 in |
| Mfr. Model # | BULK-PS-UHMW-653 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 1.25 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good