UHMW Polyethylene Bar: 0.25 in Thick, 1.25 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$8.91
/each
Earn 8 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 1.25 in...
Item 55UP08
$8.91
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Machinability | 100 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Dielectric Strength | 45 kV/mm |
| Plastic Length | 12 in |
| Minimum Temperature | -70 Degrees F |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Metal Detectable | Not Metal Detectable |
| Standards | FDA, UL 94 HB |
| Shore Hardness | 70 Shore D |
| Plastic Width | 1.25 in |
| Material | UHMW Polyethylene |
| Backing Type | No Backing |
| Color | White |
| Rockwell Hardness | 90 HRR |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Impact Strength | 16.0 ft-lb/in |
| Plastic Thickness | 0.25 in |
| Friction Coefficient | 0.15 |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Water Absorption | 0.01 % |
| Flexural Modulus | 400 MPa |
| FDA Compliance | FDA Compliant |
| UV-Resistant | Not UV-Resistant |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength | 4,400 psi |
| Wear Rate | Not Rated |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Maximum Temperature | 180 Degrees F |
| Plastic Clarity | Opaque |
| Mfr. Model # | BULK-PS-UHMW-652 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 1.25 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good