UHMW Polyethylene Bar: 0.25 in Thick, 0.375 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$7.78
/each
Earn 7 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 0.375 i...
Item 55UP06
$7.78
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Width | 0.375 in |
| Impact Strength | 16.0 ft-lb/in |
| Material | UHMW Polyethylene |
| Plastic Length | 24 in |
| Scratch-Resistant | Not Scratch-Resistant |
| Friction Coefficient | 0.15 |
| Water Absorption | 0.01 % |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength | 4,400 psi |
| Dielectric Strength | 45 kV/mm |
| Machinability | 100 % |
| Color | White |
| Flexural Modulus | 400 MPa |
| UV-Resistant | Not UV-Resistant |
| Maximum Temperature | 180 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Backing Type | No Backing |
| Wear Rate | Not Rated |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Rockwell Hardness | 90 HRR |
| Standards | FDA, UL 94 HB |
| FDA Compliance | FDA Compliant |
| Plastic Clarity | Opaque |
| Static-Resistant | Not Static-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Minimum Temperature | -70 Degrees F |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Plastic Thickness | 0.25 in |
| Shore Hardness | 70 Shore D |
| Mfr. Model # | BULK-PS-UHMW-650 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 0.375 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good