UHMW Polyethylene Bar: 0.25 in Thick, 0.75 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$9.17
/each
Earn 9 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 0.75 in...
Item 55UN93
$9.17
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| UV-Resistant | Not UV-Resistant |
| Friction Coefficient | 0.15 |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Dielectric Strength | 45 kV/mm |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Color | White |
| Water Absorption | 0.01 % |
| Machinability | 100 % |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Plastic Width | 0.75 in |
| FDA Compliance | FDA Compliant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Scratch-Resistant | Not Scratch-Resistant |
| Metal Detectable | Not Metal Detectable |
| Standards | FDA, UL 94 HB |
| Plastic Length | 24 in |
| Rockwell Hardness | 90 HRR |
| Minimum Temperature | -70 Degrees F |
| Backing Type | No Backing |
| Plastic Thickness | 0.25 in |
| Material | UHMW Polyethylene |
| Plastic Clarity | Opaque |
| Tensile Strength | 4,400 psi |
| Maximum Temperature | 180 Degrees F |
| Flexural Modulus | 400 MPa |
| Impact Strength | 16.0 ft-lb/in |
| Shore Hardness | 70 Shore D |
| Static-Resistant | Not Static-Resistant |
| Wear Rate | Not Rated |
| Mfr. Model # | BULK-PS-UHMW-124 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 0.75 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good