UHMW Polyethylene Bar: 0.25 in Thick, 0.75 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$7.86
/each
Earn 7 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 0.75 in...
Item 55UN92
$7.86
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Backing Type | No Backing |
| Plastic Thickness | 0.25 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Minimum Temperature | -70 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Friction Coefficient | 0.15 |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Color | White |
| Metal Detectable | Not Metal Detectable |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Plastic Clarity | Opaque |
| UV-Resistant | Not UV-Resistant |
| Plastic Length | 12 in |
| FDA Compliance | FDA Compliant |
| Standards | FDA, UL 94 HB |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Tensile Strength | 4,400 psi |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Rockwell Hardness | 90 HRR |
| Flexural Modulus | 400 MPa |
| Material | UHMW Polyethylene |
| Dielectric Strength | 45 kV/mm |
| Shore Hardness | 70 Shore D |
| Wear Rate | Not Rated |
| Machinability | 100 % |
| Water Absorption | 0.01 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength | 16.0 ft-lb/in |
| Plastic Width | 0.75 in |
| Mfr. Model # | BULK-PS-UHMW-114 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 0.75 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good