UHMW Polyethylene Bar: 0.25 in Thick, 0.5 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$8.28
/each
Earn 8 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 0.5 in...
Item 55UN90
$8.28
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Scratch-Resistant | Not Scratch-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Water Absorption | 0.01 % |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| UV-Resistant | Not UV-Resistant |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Tensile Strength | 4,400 psi |
| Dielectric Strength | 45 kV/mm |
| Plastic Clarity | Opaque |
| Plastic Thickness | 0.25 in |
| Static-Resistant | Not Static-Resistant |
| Impact Strength | 16.0 ft-lb/in |
| Plastic Width | 0.5 in |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Color | White |
| Wear Rate | Not Rated |
| FDA Compliance | FDA Compliant |
| Flexural Modulus | 400 MPa |
| Friction Coefficient | 0.15 |
| Plastic Length | 24 in |
| Machinability | 100 % |
| Shore Hardness | 70 Shore D |
| Rockwell Hardness | 90 HRR |
| Backing Type | No Backing |
| Material | UHMW Polyethylene |
| Minimum Temperature | -70 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Standards | FDA, UL 94 HB |
| Maximum Temperature | 180 Degrees F |
| Mfr. Model # | BULK-PS-UHMW-94 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 0.5 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good