UHMW Polyethylene Bar: 0.125 in Thick, 1.25 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$7.77
/each
Earn 7 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.125 in Thick, 1.25 i...
Item 55UN83
$7.77
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Water Absorption | 0.01 % |
| Color | White |
| Plastic Clarity | Opaque |
| FDA Compliance | FDA Compliant |
| Minimum Temperature | -70 Degrees F |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Shore Hardness | 70 Shore D |
| Plastic Length | 12 in |
| Plastic Width | 1.25 in |
| Standards | FDA, UL 94 HB |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Rockwell Hardness | 90 HRR |
| Static-Resistant | Not Static-Resistant |
| UV-Resistant | Not UV-Resistant |
| Scratch-Resistant | Not Scratch-Resistant |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Plastic Thickness | 0.125 in |
| Backing Type | No Backing |
| Material | UHMW Polyethylene |
| Friction Coefficient | 0.15 |
| Maximum Temperature | 180 Degrees F |
| Tensile Strength | 4,400 psi |
| Machinability | 100 % |
| Wear Rate | Not Rated |
| Flexural Modulus | 400 MPa |
| Dielectric Strength | 45 kV/mm |
| Impact Strength | 16.0 ft-lb/in |
| Metal Detectable | Not Metal Detectable |
| Mfr. Model # | BULK-PS-UHMW-586 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 1.25 in, Plastic Thickness 0.125 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good