UHMW Polyethylene Bar: 0.125 in Thick, 0.375 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$6.86
/each
Earn 6 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.125 in Thick, 0.375...
Item 55UN81
$6.86
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Dielectric Strength | 45 kV/mm |
| Rockwell Hardness | 90 HRR |
| Plastic Thickness | 0.125 in |
| Static-Resistant | Not Static-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Material | UHMW Polyethylene |
| Color | White |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Wear Rate | Not Rated |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Plastic Clarity | Opaque |
| Impact Strength | 16.0 ft-lb/in |
| Water Absorption | 0.01 % |
| Tensile Strength | 4,400 psi |
| Shore Hardness | 70 Shore D |
| Standards | FDA, UL 94 HB |
| Flexural Modulus | 400 MPa |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Scratch-Resistant | Not Scratch-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Maximum Temperature | 180 Degrees F |
| Backing Type | No Backing |
| FDA Compliance | FDA Compliant |
| Plastic Length | 24 in |
| Machinability | 100 % |
| Minimum Temperature | -70 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Metal Detectable | Not Metal Detectable |
| Plastic Width | 0.375 in |
| Friction Coefficient | 0.15 |
| Mfr. Model # | BULK-PS-UHMW-584 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 0.375 in, Plastic Thickness 0.125 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good