UHMW Polyethylene Bar: 0.125 in Thick, 0.25 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$7.24
/each
Earn 7 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.125 in Thick, 0.25 i...
Item 55UN78
$7.24
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Rockwell Hardness | 90 HRR |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Machinability | 100 % |
| Impact Strength | 16.0 ft-lb/in |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Plastic Width | 0.25 in |
| Metal Detectable | Not Metal Detectable |
| UV-Resistant | Not UV-Resistant |
| Plastic Thickness | 0.125 in |
| Material | UHMW Polyethylene |
| Wear Rate | Not Rated |
| FDA Compliance | FDA Compliant |
| Plastic Length | 24 in |
| Plastic Clarity | Opaque |
| Tensile Strength | 4,400 psi |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Flexural Modulus | 400 MPa |
| Backing Type | No Backing |
| Water Absorption | 0.01 % |
| Minimum Temperature | -70 Degrees F |
| Shore Hardness | 70 Shore D |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Standards | FDA, UL 94 HB |
| Color | White |
| Friction Coefficient | 0.15 |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Static-Resistant | Not Static-Resistant |
| Scratch-Resistant | Not Scratch-Resistant |
| Dielectric Strength | 45 kV/mm |
| Mfr. Model # | BULK-PS-UHMW-581 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 0.25 in, Plastic Thickness 0.125 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good