UHMW Polyethylene Bar: 0.125 in Thick, 0.25 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$6.56
/each
Earn 6 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.125 in Thick, 0.25 i...
Item 55UN77
$6.56
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Minimum Temperature | -70 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Flexural Modulus | 400 MPa |
| Scratch-Resistant | Not Scratch-Resistant |
| Standards | FDA, UL 94 HB |
| Water Absorption | 0.01 % |
| Backing Type | No Backing |
| Friction Coefficient | 0.15 |
| Plastic Clarity | Opaque |
| Dielectric Strength | 45 kV/mm |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| UV-Resistant | Not UV-Resistant |
| Wear Rate | Not Rated |
| Impact Strength | 16.0 ft-lb/in |
| Metal Detectable | Not Metal Detectable |
| Rockwell Hardness | 90 HRR |
| Static-Resistant | Not Static-Resistant |
| Color | White |
| Material | UHMW Polyethylene |
| Machinability | 100 % |
| Tensile Strength | 4,400 psi |
| Plastic Width | 0.25 in |
| FDA Compliance | FDA Compliant |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Plastic Length | 12 in |
| Plastic Thickness | 0.125 in |
| Shore Hardness | 70 Shore D |
| Mfr. Model # | BULK-PS-UHMW-580 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 0.25 in, Plastic Thickness 0.125 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good