Acetal Sheet: 0.03125 in Thick, 12 in x 24 in, White, Opaque, 9, 100 psi Tensile Strength
In Stock
$58.85
/each
Earn 58 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Acetal Sheet: 0.03125 in Thick, 12 in x 24 in...
Item 55TF96
$58.85
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Shore Hardness | 97 Shore D |
| Elongation | 37 % |
| Plastic Clarity | Opaque |
| Water Absorption | 0.22 % |
| Impact Strength | 1.1 ft-lb/in |
| Temperature Range | -50 Degrees F to 180 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Wear Rate | Not Rated |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Flexural Modulus | 2,400 MPa |
| Plastic Length | 24 in |
| Plastic Thickness | 0.03125 in |
| Plastic Width | 12 in |
| Minimum Temperature | -50 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Standards | UL 94 HB |
| Material | Acetal Copolymer |
| UV-Resistant | Not UV-Resistant |
| Maximum Temperature | 180 Degrees F |
| Tensile Strength | 9,100 psi |
| Minimum Adhesive Temperature | -30 Degrees F |
| Scratch-Resistant | Not Scratch-Resistant |
| Friction Coefficient | 0.35 |
| Backing Type | Acrylic Adhesive |
| Rockwell Hardness | 90 HRM |
| Water Absorption Rating | Good (0.051% to 0.25%) |
| Maximum Adhesive Temperature | 375 Degrees F |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Color | White |
| Coefficient of Thermal Expansion | 13 x 10^-5 K^-1 |
| Dielectric Strength | 20 kV/mm |
| Machinability | 100 % |
| Mfr. Model # | BULK-PS-AC-913 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102003 |
Description
Acetal Copolymer Sheet, Acetal Copolymer, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.03125 in, White, Plastic Clarity Opaque, Tensile Strength 9,100 psi, Impact Strength 1.1 ft-lb/in, Friction Coefficient 0.35, Water Absorption 0.22 Percent, Temperature Range -50 Degrees to 180 Degrees F, Plastic Density 0.051 lb/cu in, Plastic Hardness Rockwell M90