Acetal Sheet: 0.03125 in Thick, 12 in x 12 in, White, Opaque, 9, 100 psi Tensile Strength
In Stock
$45.70
/each
Earn 45 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Acetal Sheet: 0.03125 in Thick, 12 in x 12 in...
Item 55TF95
$45.70
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Thickness | 0.03125 in |
| Color | White |
| Maximum Adhesive Temperature | 375 Degrees F |
| Tensile Strength | 9,100 psi |
| Friction Coefficient | 0.35 |
| Wear Rate | Not Rated |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Width | 12 in |
| Impact Strength | 1.1 ft-lb/in |
| Backing Type | Acrylic Adhesive |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Maximum Temperature | 180 Degrees F |
| Plastic Clarity | Opaque |
| Machinability | 100 % |
| Rockwell Hardness | 90 HRM |
| Water Absorption Rating | Good (0.051% to 0.25%) |
| Material | Acetal Copolymer |
| Plastic Length | 12 in |
| Dielectric Strength | 20 kV/mm |
| Minimum Adhesive Temperature | -30 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Static-Resistant | Not Static-Resistant |
| Minimum Temperature | -50 Degrees F |
| Standards | UL 94 HB |
| Coefficient of Thermal Expansion | 13 x 10^-5 K^-1 |
| Water Absorption | 0.22 % |
| Flexural Modulus | 2,400 MPa |
| Shore Hardness | 97 Shore D |
| UV-Resistant | Not UV-Resistant |
| Temperature Range | -50 Degrees F to 180 Degrees F |
| Elongation | 37 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Mfr. Model # | BULK-PS-AC-907 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102003 |
Description
Acetal Copolymer Sheet, Acetal Copolymer, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.03125 in, White, Plastic Clarity Opaque, Tensile Strength 9,100 psi, Impact Strength 1.1 ft-lb/in, Friction Coefficient 0.35, Water Absorption 0.22 Percent, Temperature Range -50 Degrees to 180 Degrees F, Plastic Density 0.051 lb/cu in, Plastic Hardness Rockwell M90