HDPE Sheet: 0.125 in Thick, 16 in x 32 in, Opaque, White, 3, 500 psi Tensile Strength, 3 ft-lb/in
In Stock
$31.30
/each
Earn 31 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR HDPE Sheet: 0.125 in Thick, 16 in x 32 in, Op...
Item 55RX51
$31.30
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Thickness | 0.125 in |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Standards | FDA, UL 94 HB |
| Wear Rate | Not Rated |
| Material | HDPE |
| Tensile Strength | 3,500 psi |
| Machinability | 100 % |
| Plastic Width | 16 in |
| Rockwell Hardness | 75 HRR |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Plastic Length | 32 in |
| Friction Coefficient | 0.2 |
| Impact Strength | 3 ft-lb/in |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Dielectric Strength | 2.4 kV/mm |
| UV-Resistant | Not UV-Resistant |
| Coefficient of Thermal Expansion | 12 x 10^-5 K^-1 |
| Maximum Temperature | 180 Degrees F |
| Water Absorption | 0.01 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Color | White |
| Flexural Modulus | 1,370 MPa |
| Plastic Clarity | Opaque |
| Shore Hardness | 60 Shore D |
| Minimum Temperature | -70 Degrees F |
| Backing Type | No Backing |
| Metal Detectable | Not Metal Detectable |
| Mfr. Model # | BULK-PS-PE-416 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102017 |
Description
HDPE Sheet, HDPE, Grade Standard, Plastic Length 32 in, Plastic Width 16 in, Plastic Thickness 0.125 in, White, Plastic Clarity Opaque, Tensile Strength 3,500 psi, Impact Strength 3 ft-lb/in, Friction Coefficient 0.2, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.035 lb/cu in, Plastic Hardness 60D