Polyethylene Sheet: 0.25 in Thick, 12 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$68.70
/each
Earn 68 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.25 in Thick, 12 in x 24...
Item 55RF76
$68.70
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.15 |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Length | 24 in |
| Water Absorption | 0.01 % |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Shore Hardness | 70 Shore D |
| Maximum Temperature | 180 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength | 4,400 psi |
| Elongation | 200 % |
| Standards | FDA, UL 94 HB |
| Flexural Modulus | 400 MPa |
| UV-Resistant | Not UV-Resistant |
| Plastic Clarity | Opaque |
| Machinability | 100 % |
| Plastic Thickness | 0.25 in |
| Rockwell Hardness | 50 HRM |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Maximum Adhesive Temperature | 375 Degrees F |
| Color | White |
| Dielectric Strength | 45 kV/mm |
| Impact Strength | 16 ft-lb/in |
| Static-Resistant | Not Static-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Backing Type | Acrylic Adhesive |
| Plastic Width | 12 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Wear Rate | Not Rated |
| Material | UHMW Polyethylene |
| Minimum Temperature | -70 Degrees F |
| Minimum Adhesive Temperature | -30 Degrees F |
| Mfr. Model # | BULK-PS-UHMW-711 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 70D