Polyethylene Sheet: 0.25 in Thick, 12 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$48.80
/each
Earn 48 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.25 in Thick, 12 in x 12...
Item 55RF75
$48.80
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Friction Coefficient | 0.15 |
| Minimum Adhesive Temperature | -30 Degrees F |
| Tensile Strength | 4,400 psi |
| Standards | FDA, UL 94 HB |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Shore Hardness | 70 Shore D |
| Rockwell Hardness | 50 HRM |
| Machinability | 100 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Flexural Modulus | 400 MPa |
| Wear Rate | Not Rated |
| Water Absorption | 0.01 % |
| Maximum Temperature | 180 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Plastic Clarity | Opaque |
| UV-Resistant | Not UV-Resistant |
| Elongation | 200 % |
| Plastic Thickness | 0.25 in |
| Dielectric Strength | 45 kV/mm |
| Metal Detectable | Not Metal Detectable |
| Material | UHMW Polyethylene |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Impact Strength | 16 ft-lb/in |
| Backing Type | Acrylic Adhesive |
| Plastic Width | 12 in |
| Color | White |
| Plastic Length | 12 in |
| Minimum Temperature | -70 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Maximum Adhesive Temperature | 375 Degrees F |
| Mfr. Model # | BULK-PS-UHMW-707 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 70D