Polyethylene Sheet: 0.125 in Thick, 12 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$43.60
/each
Earn 43 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.125 in Thick, 12 in x 1...
Item 55RF66
$43.60
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Water Absorption | 0.01 % |
| Plastic Width | 12 in |
| Wear Rate | Not Rated |
| Dielectric Strength | 45 kV/mm |
| Flexural Modulus | 400 MPa |
| Static-Resistant | Not Static-Resistant |
| Backing Type | Acrylic Adhesive |
| Material | UHMW Polyethylene |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Impact Strength | 16 ft-lb/in |
| Plastic Clarity | Opaque |
| Plastic Thickness | 0.125 in |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength | 4,400 psi |
| Minimum Temperature | -70 Degrees F |
| Shore Hardness | 70 Shore D |
| Plastic Length | 12 in |
| Rockwell Hardness | 50 HRM |
| UV-Resistant | Not UV-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Machinability | 100 % |
| Elongation | 200 % |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Friction Coefficient | 0.15 |
| Maximum Adhesive Temperature | 375 Degrees F |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Maximum Temperature | 180 Degrees F |
| Scratch-Resistant | Not Scratch-Resistant |
| Standards | FDA, UL 94 HB |
| Color | White |
| Minimum Adhesive Temperature | -30 Degrees F |
| Mfr. Model # | BULK-PS-UHMW-705 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.125 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Temperature Range -70 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 70D