UHMW Polyethylene Bar: 0.125 in Thick, 0.75 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$7.15
/each
Earn 7 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.125 in Thick, 0.75 i...
Item 55RC09
$7.15
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Clarity | Opaque |
| Maximum Temperature | 180 Degrees F |
| Plastic Length | 12 in |
| Rockwell Hardness | 90 HRR |
| Backing Type | No Backing |
| Minimum Temperature | -70 Degrees F |
| Plastic Width | 0.75 in |
| Tensile Strength | 4,400 psi |
| Material | UHMW Polyethylene |
| Scratch-Resistant | Not Scratch-Resistant |
| UV-Resistant | Not UV-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Impact Strength | 16.0 ft-lb/in |
| Machinability | 100 % |
| Wear Rate | Not Rated |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Color | White |
| Dielectric Strength | 45 kV/mm |
| Static-Resistant | Not Static-Resistant |
| FDA Compliance | FDA Compliant |
| Water Absorption | 0.01 % |
| Plastic Thickness | 0.125 in |
| Standards | FDA, UL 94 HB |
| Flexural Modulus | 400 MPa |
| Friction Coefficient | 0.15 |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Shore Hardness | 70 Shore D |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Mfr. Model # | BULK-PS-UHMW-112 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 0.75 in, Plastic Thickness 0.125 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good