UHMW Polyethylene Bar: 0.125 in Thick, 0.5 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$7.38
/each
Earn 7 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.125 in Thick, 0.5 in...
Item 55RC07
$7.38
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Flexural Modulus | 400 MPa |
| Plastic Clarity | Opaque |
| Plastic Width | 0.5 in |
| Backing Type | No Backing |
| UV-Resistant | Not UV-Resistant |
| FDA Compliance | FDA Compliant |
| Rockwell Hardness | 90 HRR |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Metal Detectable | Not Metal Detectable |
| Standards | FDA, UL 94 HB |
| Water Absorption | 0.01 % |
| Color | White |
| Tensile Strength | 4,400 psi |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Friction Coefficient | 0.15 |
| Plastic Thickness | 0.125 in |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Impact Strength | 16.0 ft-lb/in |
| Machinability | 100 % |
| Dielectric Strength | 45 kV/mm |
| Static-Resistant | Not Static-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Wear Rate | Not Rated |
| Maximum Temperature | 180 Degrees F |
| Material | UHMW Polyethylene |
| Minimum Temperature | -70 Degrees F |
| Plastic Length | 24 in |
| Shore Hardness | 70 Shore D |
| Mfr. Model # | BULK-PS-UHMW-92 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 0.5 in, Plastic Thickness 0.125 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good