UHMW Polyethylene Bar: 0.125 in Thick, 0.5 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$6.85
/each
Earn 6 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.125 in Thick, 0.5 in...
Item 55RC06
$6.85
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Impact Strength | 16.0 ft-lb/in |
| Static-Resistant | Not Static-Resistant |
| FDA Compliance | FDA Compliant |
| Standards | FDA, UL 94 HB |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Plastic Width | 0.5 in |
| Plastic Thickness | 0.125 in |
| Scratch-Resistant | Not Scratch-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Dielectric Strength | 45 kV/mm |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Flexural Modulus | 400 MPa |
| Plastic Length | 12 in |
| Metal Detectable | Not Metal Detectable |
| Minimum Temperature | -70 Degrees F |
| Plastic Clarity | Opaque |
| Tensile Strength | 4,400 psi |
| Maximum Temperature | 180 Degrees F |
| Wear Rate | Not Rated |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Color | White |
| UV-Resistant | Not UV-Resistant |
| Water Absorption | 0.01 % |
| Friction Coefficient | 0.15 |
| Shore Hardness | 70 Shore D |
| Material | UHMW Polyethylene |
| Machinability | 100 % |
| Rockwell Hardness | 90 HRR |
| Backing Type | No Backing |
| Mfr. Model # | BULK-PS-UHMW-82 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 0.5 in, Plastic Thickness 0.125 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good