PVC Sheet: 16 in x 16 in, 0.375 in Thick, Opaque, Gray, 7, 200 psi Tensile Strength, 1 ft-lb/in
In Stock
$52.95
/each
Earn 52 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR PVC Sheet: 16 in x 16 in, 0.375 in Thick, Opa...
Item 55RA69
$52.95
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Static-Resistant | Not Static-Resistant |
| Flexural Modulus | 3,300 MPa |
| FDA Compliance | Not FDA Compliant |
| Wear Rate | Not Rated |
| Tensile Strength | 7,200 psi |
| Plastic Clarity | Opaque |
| UV-Resistant | Not UV-Resistant |
| Shore Hardness | 85 Shore D |
| Impact Strength | 1 ft-lb/in |
| Plastic Width | 16 in |
| Temperature Range | -20 Degrees F to 140 Degrees F |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Thickness | 0.375 in |
| Water Absorption Rating | Good (0.051% to 0.25%) |
| Friction Coefficient | 0.6 |
| Backing Type | No Backing |
| Maximum Temperature | 140 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Standards | UL 94 HB |
| Coefficient of Thermal Expansion | 5 x 10^-5 K^-1 |
| Scratch-Resistant | Not Scratch-Resistant |
| Material | PVC Type 1 |
| Color | Gray |
| Water Absorption | 0.2 % |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Machinability | 100 % |
| Rockwell Hardness | 115 HRR |
| Minimum Temperature | -20 Degrees F |
| Dielectric Strength | 14 kV/mm |
| Plastic Length | 16 in |
| Mfr. Model # | BULK-PS-PVC-350 |
| Country of Origin | China (subject to change) |
| UNSPSC | 13102030 |
Description
PVC Sheet, PVC Type 1, Grade Standard, Plastic Length 16 in, Plastic Width 16 in, Plastic Thickness 0.375 in, Gray, Plastic Clarity Opaque, Tensile Strength 7,200 psi, Impact Strength 1 ft-lb/in, Friction Coefficient 0.6, Water Absorption 0.2 Percent, Temperature Range -20 Degrees to 140 Degrees F, Plastic Density 0.051 lb/cu in, Plastic Hardness Rockwell R115