Centrifugal Pump: 1 hp, Single Phase, 115/230V AC, Cast Iron, 1 1/4 in NPT, 1 in NPT, ODP
In Stock
$604.00
Save 13%
$527.45
/each
Earn 527 points for this item
($5.27 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
DAYTON Centrifugal Pump: 1 hp, Single Phase, 115/230...
Mfr # 55JJ70
$527.45
Customers Also Viewed
No related products found.
Product Details
| Brand | DAYTON |
| Viscosity (Maximum) | 100 SUS |
| Nameplate Voltage | 115/230V AC |
| Max Specific Gravity | 1 |
| Safety Data Sheet (SDS) Applicable? | N |
| Should Sales be Restricted by Region? | N |
| Horsepower | 1 hp |
| Max Ambient Temperature | 40 Degrees C |
| Standards | UL Recognized Motor |
| Min Head | 10 ft |
| Number of Stages | 1 |
| Full Load Current | 14.4/7.2 A |
| Inlet Diameter | 1-1/4 in |
| Wetted Material | Stainless Steel, Viton, Carbon, Cast Iron, Ceramic |
| California Biodegradable Labeling Compliance | N |
| Freight Class Code | 39 |
| Port Connections | NPT |
| Motor Enclosure | Open Drip Proof |
| Flow @ 90' Head | 16 gpm |
| Case Pressure - Maximum | 100 psi |
| Discharge Diameter | 1 in |
| Inlet Type | NPT |
| Shut Off Pressure - Maximum | 43 psi |
| Storage Protection Code | A |
| Min Fluid Temperature | 40 Degrees F |
| Overall Height | 8.5 in |
| Pump Housing Material | Cast Iron |
| Solid Diameter (Maximum) | 0.13 in |
| Impeller Design | Closed |
| Chemical Compatibility | Non-Flammable Liquids |
| Discharge Orientation | Top |
| Priming | Manual |
| Best Efficiency Head | 70 ft |
| Manufacturer Part Number | 55JJ70 |
| Discharge Position | Center |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Impeller Material | Cast Iron |
| Seal Type | Mechanical |
| Discharge Standard | NPT |
| Motor Enclosure Type | ODP |
| Drive Coupling Type | No Coupling |
| Min Flow | 16 gpm |
| Overall Length | 16 in |
| Max Fluid Temperature | 200 Degrees F |
| Ozone Depleting Substance | N |
| Inlet Position | Center |
| Intake and Discharge Size | 1-1/4 in , 1 in |
| Feet of Head (Maximum) | 100 ft |
| Bearing Type | Ball |
| Inlet | 1-1/4 in NPT |
| Impeller Diameter | 5-7/32 in |
| Is this a Hazardous Material Product? | N |
| Flow Rate (Maximum) | 59 gpm |
| For Use With Potable Systems | No |
| Discharge | 1 in NPT |
| Electrical Connection Type | Hardwired |
| Fluid Temperature Range | 40 Degrees F to 200 Degrees F |
| Max Motor Speed | 3,450 RPM |
| Inlet Gender | Female |
| Flow @ 10' of Head | 59 gpm |
| Includes California Prop 65 Short-Form Warning | Y |
| Motor Design | Capacitor-Start |
| Contains California Prop 65 Carcinogen | Y |
| Display Sell UOM | EA |
| Mounting Orientation | Horizontal |
| Shaft Outer Diameter | 5/8 in |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Volute Material | Cast Iron |
| Discharge Type | NPT |
| Phase | Single |
| Display Qty | 1 |
| Flow @ 30' Head | 51 gpm |
| Hazardous Location Class | Not Rated |
| Discharge Location | Top Center |
| Duty Cycle | Continuous |
| Frequency | 60 Hz |
| Inlet Standard | NPT |
| Pumping Application | Spraying Systems, Booster Services, Jockey Pump Services, Water Circulation, Irrigation |
| Flow @ 70' Head | 34 gpm |
| Shaft Seal Material | FKM, Carbon/Ceramic |
| Best Efficiency Flow | 34 gpm |
| Overall Width | 7.8 in |
| Service Factor | 1.4 |
| Shaft Material | Stainless Steel |
| Discharge Rotation Increments | 0 Degrees |
| Thermal Overload Protection | Yes |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Includes | Manual |
| Manufacturers Warranty Length | 1 yr |
| Product Powered by Fossil Fuel | N |
| Motor Frame Size | 56J |
| Flow @ 50' Head | 43 gpm |
| Flow @ 40' Head | 47 gpm |
| Discharge Gender | Female |
| Flow @ 20' Head | 55 gpm |
| Mfr. Model # | 55JJ70 |
Description
Centrf Pmp, 1 hp, CI, 1", Carbon/Ceramic/FKM