Polyethylene Roll: 0.031 in Thick, 12 in x 25 ft, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$7,419.00
/each
Earn 7419 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.031 in Thick, 12 in x 25...
Item 53TA41
$7,419.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Metal Detectable | Not Metal Detectable |
| Minimum Temperature | -20 Degrees F |
| Friction Coefficient | 0.15 |
| Color | White |
| Backing Type | Rubber Adhesive |
| Plastic Length | 25 ft |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| UV-Resistant | Not UV-Resistant |
| Dielectric Strength | 3,000 V/mil |
| Plastic Clarity | Opaque |
| Light Transmission | 18 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Shore Hardness | 68 Shore D |
| Flexural Modulus | 80,000 psi |
| Standards | FDA, USDA, 3-A Dairy |
| Static-Resistant | Not Static-Resistant |
| Maximum Adhesive Temperature | 180 Degrees F |
| Water Absorption | 0 % |
| Material | UHMW Polyethylene |
| FDA Compliance | 21 CFR 177.1550 |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Minimum Adhesive Temperature | -20 Degrees F |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Plastic Width | 12 in |
| Plastic Thickness | 0.031 in |
| Machinability | 100 % |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Maximum Temperature | 180 Degrees F |
| Mfr. Model # | 461XXXI-R-1225 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 25 ft, Plastic Width 12 in, Plastic Thickness 0.031 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D