Polyethylene Roll: 0.02 in Thick, 18 in x 25 ft, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$7,297.00
/each
Earn 7297 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.02 in Thick, 18 in x 25...
Item 53TA36
$7,297.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Machinability | 100 % |
| Flexural Modulus | 80,000 psi |
| Friction Coefficient | 0.15 |
| Plastic Clarity | Opaque |
| FDA Compliance | 21 CFR 177.1550 |
| Standards | FDA, USDA, 3-A Dairy |
| Backing Type | Rubber Adhesive |
| Metal Detectable | Not Metal Detectable |
| Maximum Adhesive Temperature | 180 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Minimum Temperature | -20 Degrees F |
| Plastic Width | 18 in |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| UV-Resistant | Not UV-Resistant |
| Plastic Thickness | 0.02 in |
| Dielectric Strength | 3,000 V/mil |
| Material | UHMW Polyethylene |
| Color | White |
| Light Transmission | 18 % |
| Shore Hardness | 68 Shore D |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Water Absorption | 0 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Minimum Adhesive Temperature | -20 Degrees F |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Length | 25 ft |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Mfr. Model # | 461XX-R-1825 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 25 ft, Plastic Width 18 in, Plastic Thickness 0.02 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D