Polyethylene Roll: 0.01 in Thick, 18 in x 24 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$292.00
/each
Earn 292 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.01 in Thick, 18 in x 24...
Item 53RY06
$292.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Maximum Temperature | 180 Degrees F |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Machinability | 100 % |
| Shore Hardness | 68 Shore D |
| Light Transmission | 18 % |
| Backing Type | Rubber Adhesive |
| Dielectric Strength | 3,000 V/mil |
| Minimum Adhesive Temperature | -20 Degrees F |
| Flexural Modulus | 80,000 psi |
| Friction Coefficient | 0.15 |
| Standards | FDA, USDA, 3-A Dairy |
| Water Absorption | 0 % |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Maximum Adhesive Temperature | 180 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Metal Detectable | Not Metal Detectable |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| FDA Compliance | 21 CFR 177.1550 |
| Plastic Clarity | Opaque |
| Plastic Width | 18 in |
| Material | UHMW Polyethylene |
| Color | White |
| Scratch-Resistant | Not Scratch-Resistant |
| Minimum Temperature | -20 Degrees F |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Static-Resistant | Not Static-Resistant |
| Plastic Thickness | 0.01 in |
| Plastic Length | 24 in |
| Mfr. Model # | 461X-R-1802 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 18 in, Plastic Thickness 0.01 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D