Polyethylene Roll: 3 mil Thick, 18 in x 24 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$105.85
/each
Earn 105 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 3 mil Thick, 18 in x 24 in...
Item 53RX93
$105.85
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Color | White |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Metal Detectable | Not Metal Detectable |
| Friction Coefficient | 0.15 |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Clarity | Opaque |
| Light Transmission | 18 % |
| Plastic Length | 24 in |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Maximum Adhesive Temperature | 180 Degrees F |
| Scratch-Resistant | Not Scratch-Resistant |
| Minimum Temperature | -20 Degrees F |
| Flexural Modulus | 80,000 psi |
| Material | UHMW Polyethylene |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Width | 18 in |
| Shore Hardness | 68 Shore D |
| Dielectric Strength | 3,000 V/mil |
| FDA Compliance | 21 CFR 177.1550 |
| Maximum Temperature | 180 Degrees F |
| Machinability | 100 % |
| Backing Type | Rubber Adhesive |
| Minimum Adhesive Temperature | -20 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Plastic Thickness | 3 mil |
| Static-Resistant | Not Static-Resistant |
| Water Absorption | 0 % |
| Standards | FDA, USDA, 3-A Dairy |
| Mfr. Model # | 461III-R-1802 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 18 in, Plastic Thickness 3 mil, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D