Polyethylene Roll: 0.031 in Thick, 12 in x 24 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$593.50
/each
Earn 593 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.031 in Thick, 12 in x 24...
Item 53RX88
$593.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Plastic Length | 24 in |
| Material | UHMW Polyethylene |
| Plastic Thickness | 0.031 in |
| UV-Resistant | Not UV-Resistant |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Width | 12 in |
| FDA Compliance | 21 CFR 177.1550 |
| Light Transmission | 18 % |
| Backing Type | Rubber Adhesive |
| Maximum Adhesive Temperature | 180 Degrees F |
| Minimum Temperature | -20 Degrees F |
| Color | White |
| Standards | FDA, USDA, 3-A Dairy |
| Static-Resistant | Not Static-Resistant |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Metal Detectable | Not Metal Detectable |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Water Absorption | 0 % |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Maximum Temperature | 180 Degrees F |
| Flexural Modulus | 80,000 psi |
| Friction Coefficient | 0.15 |
| Plastic Clarity | Opaque |
| Machinability | 100 % |
| Dielectric Strength | 3,000 V/mil |
| Shore Hardness | 68 Shore D |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Minimum Adhesive Temperature | -20 Degrees F |
| Mfr. Model # | 461XXXI-R-2401 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.031 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D