Polyethylene Roll: 0.031 in Thick, 12 in x 18 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$445.25
/each
Earn 445 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.031 in Thick, 12 in x 18...
Item 53RX87
$445.25
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Flexural Modulus | 80,000 psi |
| Metal Detectable | Not Metal Detectable |
| Static-Resistant | Not Static-Resistant |
| Friction Coefficient | 0.15 |
| Material | UHMW Polyethylene |
| Backing Type | Rubber Adhesive |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Maximum Adhesive Temperature | 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Plastic Thickness | 0.031 in |
| Light Transmission | 18 % |
| Maximum Temperature | 180 Degrees F |
| Minimum Adhesive Temperature | -20 Degrees F |
| Machinability | 100 % |
| Dielectric Strength | 3,000 V/mil |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Scratch-Resistant | Not Scratch-Resistant |
| Water Absorption | 0 % |
| Plastic Length | 18 in |
| UV-Resistant | Not UV-Resistant |
| Color | White |
| FDA Compliance | 21 CFR 177.1550 |
| Minimum Temperature | -20 Degrees F |
| Shore Hardness | 68 Shore D |
| Standards | FDA, USDA, 3-A Dairy |
| Plastic Width | 12 in |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Clarity | Opaque |
| Mfr. Model # | 461XXXI-R-1801 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 18 in, Plastic Width 12 in, Plastic Thickness 0.031 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D