Polyethylene Roll: 0.02 in Thick, 12 in x 24 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$389.25
/each
Earn 389 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.02 in Thick, 12 in x 24...
Item 53RX82
$389.25
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Static-Resistant | Not Static-Resistant |
| Metal Detectable | Not Metal Detectable |
| Material | UHMW Polyethylene |
| Plastic Width | 12 in |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| FDA Compliance | 21 CFR 177.1550 |
| Plastic Clarity | Opaque |
| UV-Resistant | Not UV-Resistant |
| Backing Type | Rubber Adhesive |
| Color | White |
| Minimum Temperature | -20 Degrees F |
| Plastic Thickness | 0.02 in |
| Machinability | 100 % |
| Shore Hardness | 68 Shore D |
| Flexural Modulus | 80,000 psi |
| Plastic Length | 24 in |
| Friction Coefficient | 0.15 |
| Dielectric Strength | 3,000 V/mil |
| Standards | FDA, USDA, 3-A Dairy |
| Maximum Temperature | 180 Degrees F |
| Water Absorption | 0 % |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Light Transmission | 18 % |
| Minimum Adhesive Temperature | -20 Degrees F |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Scratch-Resistant | Not Scratch-Resistant |
| Maximum Adhesive Temperature | 180 Degrees F |
| Mfr. Model # | 461XX-R-2401 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.02 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D