Polyethylene Roll: 0.02 in Thick, 12 in x 18 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$292.00
/each
Earn 292 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.02 in Thick, 12 in x 18...
Item 53RX81
$292.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Backing Type | Rubber Adhesive |
| Plastic Width | 12 in |
| Light Transmission | 18 % |
| Metal Detectable | Not Metal Detectable |
| Maximum Temperature | 180 Degrees F |
| Minimum Adhesive Temperature | -20 Degrees F |
| Scratch-Resistant | Not Scratch-Resistant |
| FDA Compliance | 21 CFR 177.1550 |
| Shore Hardness | 68 Shore D |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Flexural Modulus | 80,000 psi |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Water Absorption | 0 % |
| Plastic Length | 18 in |
| Color | White |
| Friction Coefficient | 0.15 |
| Machinability | 100 % |
| Material | UHMW Polyethylene |
| Maximum Adhesive Temperature | 180 Degrees F |
| Plastic Thickness | 0.02 in |
| Dielectric Strength | 3,000 V/mil |
| UV-Resistant | Not UV-Resistant |
| Plastic Clarity | Opaque |
| Standards | FDA, USDA, 3-A Dairy |
| Minimum Temperature | -20 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Mfr. Model # | 461XX-R-1801 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 18 in, Plastic Width 12 in, Plastic Thickness 0.02 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D