Polyethylene Roll: 0.02 in Thick, 12 in x 12 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$194.75
/each
Earn 194 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.02 in Thick, 12 in x 12...
Item 53RX80
$194.75
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Length | 12 in |
| Maximum Adhesive Temperature | 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Minimum Adhesive Temperature | -20 Degrees F |
| Shore Hardness | 68 Shore D |
| Plastic Width | 12 in |
| Plastic Clarity | Opaque |
| Static-Resistant | Not Static-Resistant |
| Backing Type | Rubber Adhesive |
| Color | White |
| Water Absorption | 0 % |
| Material | UHMW Polyethylene |
| Flexural Modulus | 80,000 psi |
| Plastic Thickness | 0.02 in |
| Friction Coefficient | 0.15 |
| UV-Resistant | Not UV-Resistant |
| Metal Detectable | Not Metal Detectable |
| FDA Compliance | 21 CFR 177.1550 |
| Minimum Temperature | -20 Degrees F |
| Standards | FDA, USDA, 3-A Dairy |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Dielectric Strength | 3,000 V/mil |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Maximum Temperature | 180 Degrees F |
| Light Transmission | 18 % |
| Machinability | 100 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Mfr. Model # | 461XX-R-1201 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.02 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D