Polyethylene Roll: 0.015 in Thick, 12 in x 24 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$292.00
/each
Earn 292 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.015 in Thick, 12 in x 24...
Item 53RX76
$292.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Metal Detectable | Not Metal Detectable |
| Machinability | 100 % |
| Material | UHMW Polyethylene |
| Standards | FDA, USDA, 3-A Dairy |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Scratch-Resistant | Not Scratch-Resistant |
| Maximum Temperature | 180 Degrees F |
| Color | White |
| Flexural Modulus | 80,000 psi |
| Friction Coefficient | 0.15 |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Light Transmission | 18 % |
| Shore Hardness | 68 Shore D |
| Plastic Length | 24 in |
| UV-Resistant | Not UV-Resistant |
| Water Absorption | 0 % |
| Minimum Temperature | -20 Degrees F |
| Plastic Clarity | Opaque |
| Static-Resistant | Not Static-Resistant |
| Dielectric Strength | 3,000 V/mil |
| FDA Compliance | 21 CFR 177.1550 |
| Minimum Adhesive Temperature | -20 Degrees F |
| Backing Type | Rubber Adhesive |
| Plastic Thickness | 0.015 in |
| Plastic Width | 12 in |
| Maximum Adhesive Temperature | 180 Degrees F |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Mfr. Model # | 461XV-R-2401 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.015 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D