Polyethylene Roll: 0.01 in Thick, 12 in x 24 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$194.75
/each
Earn 194 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.01 in Thick, 12 in x 24...
Item 53RX70
$194.75
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Plastic Width | 12 in |
| Static-Resistant | Not Static-Resistant |
| Minimum Adhesive Temperature | -20 Degrees F |
| Minimum Temperature | -20 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Dielectric Strength | 3,000 V/mil |
| Friction Coefficient | 0.15 |
| Light Transmission | 18 % |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Plastic Length | 24 in |
| Standards | FDA, USDA, 3-A Dairy |
| Water Absorption | 0 % |
| Backing Type | Rubber Adhesive |
| Color | White |
| Shore Hardness | 68 Shore D |
| Material | UHMW Polyethylene |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Flexural Modulus | 80,000 psi |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Plastic Thickness | 0.01 in |
| Maximum Adhesive Temperature | 180 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Plastic Clarity | Opaque |
| FDA Compliance | 21 CFR 177.1550 |
| Maximum Temperature | 180 Degrees F |
| Machinability | 100 % |
| Mfr. Model # | 461X-R-2401 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.01 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D