Polyethylene Roll: 0.01 in Thick, 12 in x 18 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$146.00
/each
Earn 146 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.01 in Thick, 12 in x 18...
Item 53RX69
$146.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Color | White |
| Material | UHMW Polyethylene |
| Metal Detectable | Not Metal Detectable |
| FDA Compliance | 21 CFR 177.1550 |
| Plastic Width | 12 in |
| Backing Type | Rubber Adhesive |
| Standards | FDA, USDA, 3-A Dairy |
| Plastic Thickness | 0.01 in |
| Water Absorption | 0 % |
| Plastic Clarity | Opaque |
| Plastic Length | 18 in |
| Minimum Temperature | -20 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Shore Hardness | 68 Shore D |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Friction Coefficient | 0.15 |
| Minimum Adhesive Temperature | -20 Degrees F |
| Machinability | 100 % |
| UV-Resistant | Not UV-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Light Transmission | 18 % |
| Maximum Adhesive Temperature | 180 Degrees F |
| Flexural Modulus | 80,000 psi |
| Dielectric Strength | 3,000 V/mil |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Scratch-Resistant | Not Scratch-Resistant |
| Mfr. Model # | 461X-R-1801 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 18 in, Plastic Width 12 in, Plastic Thickness 0.01 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D