Polyethylene Roll: 0.01 in Thick, 12 in x 12 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$97.35
/each
Earn 97 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.01 in Thick, 12 in x 12...
Item 53RX68
$97.35
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Clarity | Opaque |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Scratch-Resistant | Not Scratch-Resistant |
| FDA Compliance | 21 CFR 177.1550 |
| Plastic Length | 12 in |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Light Transmission | 18 % |
| Dielectric Strength | 3,000 V/mil |
| Plastic Thickness | 0.01 in |
| Shore Hardness | 68 Shore D |
| Metal Detectable | Not Metal Detectable |
| Plastic Width | 12 in |
| Minimum Temperature | -20 Degrees F |
| Backing Type | Rubber Adhesive |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Flexural Modulus | 80,000 psi |
| Machinability | 100 % |
| Maximum Temperature | 180 Degrees F |
| Water Absorption | 0 % |
| Material | UHMW Polyethylene |
| Color | White |
| Maximum Adhesive Temperature | 180 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Friction Coefficient | 0.15 |
| Minimum Adhesive Temperature | -20 Degrees F |
| Standards | FDA, USDA, 3-A Dairy |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| UV-Resistant | Not UV-Resistant |
| Mfr. Model # | 461X-R-1201 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.01 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D