Polyethylene Roll: 0.02 in Thick, 12 in x 25 ft, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$4,642.00
/each
Earn 4642 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.02 in Thick, 12 in x 25...
Item 53RX44
$4,642.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Shore Hardness | 68 Shore D |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| UV-Resistant | Not UV-Resistant |
| Friction Coefficient | 0.15 |
| Static-Resistant | Not Static-Resistant |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Backing Type | Acrylic Adhesive |
| Dielectric Strength | 3,000 V/mil |
| Plastic Length | 25 ft |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Standards | FDA, USDA, 3-A Dairy |
| Plastic Clarity | Opaque |
| Water Absorption | 0 % |
| Maximum Adhesive Temperature | 180 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Color | White |
| Minimum Temperature | -20 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Light Transmission | 18 % |
| Plastic Width | 12 in |
| Scratch-Resistant | Not Scratch-Resistant |
| FDA Compliance | 21 CFR 177.1550 |
| Flexural Modulus | 80,000 psi |
| Material | UHMW Polyethylene |
| Machinability | 100 % |
| Plastic Thickness | 0.02 in |
| Minimum Adhesive Temperature | -20 Degrees F |
| Mfr. Model # | 461XX-A-1225 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 25 ft, Plastic Width 12 in, Plastic Thickness 0.02 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D