Polyethylene Roll: 0.02 in Thick, 12 in x 15 ft, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$2,785.00
/each
Earn 2785 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.02 in Thick, 12 in x 15...
Item 53RX08
$2,785.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Water Absorption | 0 % |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Color | White |
| Scratch-Resistant | Not Scratch-Resistant |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Material | UHMW Polyethylene |
| Maximum Adhesive Temperature | 180 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Shore Hardness | 68 Shore D |
| Flexural Modulus | 80,000 psi |
| Metal Detectable | Not Metal Detectable |
| Static-Resistant | Not Static-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Standards | FDA, USDA, 3-A Dairy |
| Plastic Width | 12 in |
| UV-Resistant | Not UV-Resistant |
| Minimum Adhesive Temperature | -20 Degrees F |
| Backing Type | Acrylic Adhesive |
| Dielectric Strength | 3,000 V/mil |
| Friction Coefficient | 0.15 |
| Plastic Length | 15 ft |
| Light Transmission | 18 % |
| Minimum Temperature | -20 Degrees F |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Plastic Clarity | Opaque |
| Machinability | 100 % |
| FDA Compliance | 21 CFR 177.1550 |
| Plastic Thickness | 0.02 in |
| Mfr. Model # | 461XX-A-1215 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 15 ft, Plastic Width 12 in, Plastic Thickness 0.02 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D