Polyethylene Roll: 0.02 in Thick, 12 in x 24 in, Opaque, White, 5, 000 psi Tensile Strength
In Stock
$371.50
/each
Earn 371 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Roll: 0.02 in Thick, 12 in x 24...
Item 53RV26
$371.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Plastic Thickness | 0.02 in |
| Flexural Modulus | 80,000 psi |
| Coefficient of Thermal Expansion | 11 x 10^-5 |
| Plastic Width | 12 in |
| Light Transmission | 18 % |
| FDA Compliance | 21 CFR 177.1550 |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Backing Type | Acrylic Adhesive |
| Minimum Temperature | -20 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Material | UHMW Polyethylene |
| Machinability | 100 % |
| Maximum Adhesive Temperature | 180 Degrees F |
| Plastic Length | 24 in |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Clarity | Opaque |
| Shore Hardness | 68 Shore D |
| Color | White |
| Standards | FDA, USDA, 3-A Dairy |
| Water Absorption | 0 % |
| Minimum Adhesive Temperature | -20 Degrees F |
| Maximum Temperature | 180 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Dielectric Strength | 3,000 V/mil |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Friction Coefficient | 0.15 |
| UV-Resistant | Not UV-Resistant |
| Mfr. Model # | 461XX-A-1202 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Roll, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.02 in, White, Plastic Clarity Opaque, Tensile Strength 5,000 psi, Impact Strength 0.8 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0 Percent, Temperature Range -20 Degrees to 180 Degrees F, Plastic Density 58.058 lb/cu ft, Plastic Hardness 68D