Grinder Pump: Vertical, Single Phase, 1 hp, 115V AC, 42 gpm @ 10' of Head, 1 1/4 in FNPT
In Stock
$2,435.00
/each
Earn 2435 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
ZOELLER Grinder Pump: Vertical, Single Phase, 1 hp, 1...
Item 53ME02
$2,435.00
Customers Also Viewed
No related products found.
Product Details
| Brand | ZOELLER |
| For Media Type | Sewage Water |
| Volute Material | Cast Iron |
| Duty Cycle | Intermittent |
| Cord Termination | Bare Wire Leads |
| Sump Pit Diameter - Minimum | 18 in |
| Requires Control Panel | Control Panel Required |
| Discharge Orientation | Vertical |
| Phase | Single |
| Motor Housing Material | Cast Iron |
| Liquid Temperature - Maximum | 130 Degrees F |
| Rated Voltage | 115V AC |
| Shaft Seal Material | Carbon/Ceramic |
| Discharge | 1-1/4 in FNPT |
| Horsepower | 1 hp |
| Manufacturers Warranty Length | 1 yr |
| Impeller Material | Plastic |
| Power Source | Corded Electric |
| Current | 13.6 A |
| Shaft Seal Type | Single Mechanical |
| Frequency | 60 Hz |
| Hazardous Location Class | Not Rated |
| Cord Length | 20 ft |
| Feet of Head - Maximum | 53 ft |
| Switch Actuation | Tether Float |
| Flow Rate @ 10 ft of Head | 42 gpm |
| Switch Electrical Connection | Piggyback |
| Mfr. Model # | 818-0006 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 40151517 |
Description
Grinder Pump, HP 1 hp, Rated Voltage 115V AC, Hz 60, Phase - Pumps 1, Amps 13.6 A, Motor Type CSCR, Body Material Cast Iron, Impeller Material Plastic, Shaft Seal Material - Pumps Carbon, Ceramic, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Flow Rate @ 10 Ft. of Head 42 gpm, Flow Rate @ 15 Ft. of Head 40 gpm, Flow Rate @ 20 Ft. of Head 37 gpm, Flow Rate @ 40 Ft. of Head 16.5 gpm, Max. Head 53 ft, Min. Sump Pit Dia. 18 in, Body Dia. 11 5/8 in, Width at Widest Point 8 in