Magnetic Drive Pump: 1/3 hp HP, Single Phase, 115/230V AC, Glass-Filled Polyphenylene
In Stock
$1,614.00
Save 21%
$1,281.30
/each
Earn 1281 points for this item
($12.81 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
LITTLE GIANT Magnetic Drive Pump: 1/3 hp HP, Single Phase,...
Mfr # 585604
$1,281.30
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | LITTLE GIANT |
| Inlet Gender | Female |
| Gasket Material | FKM |
| Flow @ 15' Head | 28.1 gpm |
| Flow @ 24' Head | 23.9 gpm |
| Inlet Diameter | 1 in |
| Inlet Standard | NPT |
| Display Qty | 1 |
| Min Ambient Temperature | 32 Degrees F |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Shaft Seal Type | Sealless |
| Pump Design | End Suction |
| Drive Coupling Type | Magnetic Coupling |
| Max Fluid Temperature | 180 Degrees F |
| Discharge Gender | Male |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Overall Length | 16.3 in |
| Port Connections | NPT |
| Number of Stages | 1 |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Is this a Hazardous Material Product? | N |
| Max Specific Gravity | 1.1 |
| Priming | Manual |
| Bearing Type | Thrust |
| Phase | Single |
| Hazardous Location Class | Not Rated |
| Discharge Standard | NPT |
| Fluid Temperature Range | 32 Degrees F to 180 Degrees F |
| Motor Enclosure Type | TEFC |
| Display Sell UOM | EA |
| Chemical Compatibility | Plating Solutions, Copper Sulfate 5%, Lactic Acid, Sodium Sulfide, Barium Hydroxide, Naphthalene, Gasoline, Sodium Aluminate, Acid, Ethylene Chloride, Diesel Fuel, Sodium Bisulfate, Ethylene Glycol, Perchloroethylene, Benzene, Soap, Vinegar, Kerosene, Sodium Bisulfite, Calcium Sulfate, Chlorobenzene, Sodium Carbonate, Sodium Cyanide, Ethyl Chloride, Magnesium Hydroxide, Potassium Dichromate, Zinc Sulfate, Copper Cyanide, Sodium Sulfate, Sodium Bicarbonate, Lubricants, Potassium Bicarbonate, Butane, Potassium Sulfate, Heptane, Sodium Chloride, Sodium Chromate, Mineral Oil, Sodium Chlorate, Ammonium Chloride, Butadiene, Ferrous Chloride, Aluminum Chloride 20%, Acetylene, Water, Butylene, Calcium Chloride, Sulfuric Acid 10% to 75%, Barium Sulfate, Formic Acid, Aluminum Sulfate, Distilled, Potassium Chlorate, Carbon Disulfide, Cyclohexane, Cotton Seed Oil, Borax, Potassium Carbonate, Naphtha, Ferrous Sulfate, Potassium Chloride, Jet Fuel, Sulfuric Acid 1% to 10%, Antifreeze, Ferric Chloride, Turpentine, Ammonium Hydroxide, Sodium Thiosulphate, Salt, Mine, Fuel Oil, Alcohol, Zinc Chloride, Xylene, Barium Chloride, Stoddard Solvent, Hexane, Magnesium Sulfate, Potassium Permanganate, Aluminum Chloride, Tomato Juice |
| Impeller Diameter | 3-47/250 in |
| Overall Width | 8.8 in |
| Shut Off Pressure - Maximum | 17.5 psi |
| Case Pressure - Maximum | 17.5 psi |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Mounting Orientation | Horizontal |
| Inlet Type | FNPT |
| Flow @ 6' Head | 31.8 gpm |
| Pump Mounting Style | Base-Mounted |
| Discharge | 3/4 in NPT |
| Nameplate Voltage | 115/230V AC |
| Motor Design | Permanent Split Capacitor |
| Safety Data Sheet (SDS) Applicable? | N |
| Storage Protection Code | A |
| Contains California Prop 65 Carcinogen | Y |
| Freight Class Code | 260 |
| Pumping Application | Chemical Transfer |
| Includes California Prop 65 Short-Form Warning | Y |
| Flow @ 40' Head | 6 gpm |
| Housing Material | Glass-Filled Polyphenylene |
| Discharge Diameter | 3/4 in |
| Manufacturer Part Number | 585604 |
| Flow Rate (Maximum) | 32 gpm |
| Motor Frame Size | 56 |
| Overall Height | 8.6 in |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Pump Drive Configuration | Close-Coupled |
| Feet of Head (Maximum) | 40.5 ft |
| Inlet | 1 in FNPT |
| Max Ambient Temperature | 77 Degrees F |
| Ozone Depleting Substance | N |
| Best Efficiency Head | 30 ft |
| Frequency | 60 Hz |
| Best Efficiency Flow | 20 gpm |
| Full Load Current | 5 A |
| Mounting Location | Open Air |
| Flow @ 9' Head | 30.5 gpm |
| Manufacturers Warranty Length | 1 yr |
| Suction Port | 1 in NPT |
| Flow @ 18' Head | 25 gpm |
| Impeller Material | Carbon/Polyphenylene |
| Horsepower (Maximum) | 1/3 hp |
| Min Fluid Temperature | 32 Degrees F |
| Viscosity (Maximum) | 100 SUS |
| Mfr. Model # | 585604 |
Description
Magnt Drv Pmp, 3/4in, NPT, 1/3hp, Glss PPS