Turbine Pump: 1 hp, Single Phase, 115/230V AC, Cast Iron, 700 ft Max. Head, 1 1/4 in Inlet Dia., NPT
In Stock
$2,022.00
Save 31%
$1,399.41
/each
Earn 1399 points for this item
($13.99 for your next purchase!)
REGISTER NOW TO EARN!
1 day
Request quantity discount pricing
You're Viewing
DAYTON Turbine Pump: 1 hp, Single Phase, 115/230V AC...
Mfr # 4P916
$1,399.41
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2534 |
| Brand | DAYTON |
| Flow Rate (Maximum) | 40 gpm |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Motor Enclosure Type | ODP |
| Freight Class Code | 39 |
| Features | 100% Tested, Self-Adjusting Impeller, Steep Operating Characteristics, Volatile Fluid Handling, Shaft Sleeve, Low NPSH, Non-Cavitating, Water Flinger |
| Phase | Single |
| Flow @ 20 psi | 10.8 gpm |
| Standards | ASTM B62, ASTM A48, AISI 316, ASTM B16, AISI 304 |
| Inlet Standard | NPT |
| Chemical Compatibility | Water |
| Discharge Rotation | 90 Degrees Increments |
| Flow @ 90 psi | 9.3 gpm |
| Flow @ 40 psi | 10.4 gpm |
| Flow @ 70 psi | 9.6 gpm |
| Case Pressure - Maximum | 300 psi |
| Horsepower | 1 hp |
| Motor Frame Size | 56C |
| Inlet Gender | Female |
| Number of Stages | 1 |
| Impeller Material | Bronze |
| Mounting Orientation | Vertical, Horizontal |
| Contains California Prop 65 Reproductive Toxicant | N |
| Wetted Material | Cast Iron, Bronze Fitted |
| RPM (Maximum) | 3,450 RPM |
| Motor Enclosure | Open Drip Proof |
| Feet of Head (Maximum) | 700 ft |
| Discharge Gender | Female |
| Flow @ 80 psi | 9.5 gpm |
| NPSHr | 200 psi |
| Contains California Prop 65 Carcinogen | N |
| Flow @ 10 psi | 11.1 gpm |
| Min Fluid Temperature | -20 Degrees F |
| Flow @ 100 psi | 9.05 gpm |
| Ozone Depleting Substance | N |
| Display Sell UOM | EA |
| Overall Width | 6.75 in |
| Pumping Application | Condensate Return, Booster Service, Liquid Transfer, Cooling and Heat Transfer, Boiler Feed |
| Port Connections | NPT |
| Solid Diameter (Maximum) | 25 micron |
| Full Load Current | 11.4/5.8-5.7 |
| Overall Height | 8.06 in |
| Series | T51 |
| Pump Housing Material | Cast Iron |
| Max Ambient Temperature | 86 Degrees F |
| Flow @ 30 psi | 10.6 gpm |
| Best Efficiency Head | 130 ft |
| Flow @ 50 psi | 10.2 gpm |
| Manufacturer Part Number | 4P916 |
| Operation | Manual |
| Discharge Standard | NPT |
| Duty Cycle | Continuous |
| Pump Design | Regenerative Turbine |
| Safety Data Sheet (SDS) Applicable? | N |
| Motor Design | Capacitor-Start |
| Shaft Seal Material | Buna-N/Carbon/Ceramic |
| Impeller Design | Peripheral Vaned |
| Manufacturers Warranty Length | 1 yr |
| Intake and Discharge Size | 1-1/4 in , 1 in |
| Shut Off Pressure - Maximum | 104 psi |
| Best Efficiency Flow | 8.5 gpm |
| Flow @ 60 psi | 10 gpm |
| Shaft Seal Type | Mechanical |
| Min Flow | 2 gpm |
| Max Specific Gravity | 1 |
| Min Ambient Temperature | -20 Degrees F |
| Inlet Diameter | 1-1/4 in |
| Display Qty | 1 |
| Electrical Connection Type | Plug-In |
| Max Fluid Temperature | 230 Degrees F |
| Frequency | 60 Hz |
| Thermal Overload Protection | Yes |
| Is this a Hazardous Material Product? | N |
| Discharge Diameter | 1 in |
| Storage Protection Code | A |
| Priming | Manual |
| Nameplate Voltage | 115/230V AC |
| Mfr. Model # | 4P916 |
Description
Bronze-fitted Turbine Pump