Rotary Gear Pump Head: Magnetic Drive, Cast Iron Body, 1/4" FNPT, 4.8 gpm, Pedestal
In Stock
$261.75
/each
Earn 261 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Rotary Gear Pump Head: Magnetic Drive, Cast I...
Item 4KHK2
$261.75
Customers Also Viewed
No related products found.
Product Details
| Brand | DAYTON |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Safety Data Sheet (SDS) Applicable? | N |
| Overall Width | 3 in |
| O-Ring Material | Viton |
| Inlet Type | FNPT |
| Gear Material | Steel |
| Operating Pressure - Maximum | 100 psi |
| Flow Rate @ 125 psi | 4.8 gpm |
| Ozone Depleting Substance | N |
| Body Material | Cast Iron |
| Discharge Diameter | 1/4 in |
| Required Horsepower | 1 hp |
| Feet of Head - Maximum | 230 ft |
| Discharge Type | FNPT |
| Operating Temp. Range | -20 Degrees F to 210 Degrees F |
| Flow Rate @ 75 psi | 4.6 gpm |
| Is this a Hazardous Material Product? | N |
| Viscosity - Maximum | 500 SUS |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Series | B-Series |
| Chemical Compatibility | Water, Diesel, Ethylene Glycol, Fuel Oil, Engine Oil |
| Discharge Gender | Female |
| For Motor Speed - Maximum | 1,725 RPM |
| Inlet Diameter | 1/4 in |
| Motor Mounting Type | Pedestal |
| Operating Temperature - Maximum | 210 Degrees F |
| Product Powered by Fossil Fuel | N |
| Bushing / Bearing | Cast Iron Bushing |
| Gear Design | Spur |
| Display Qty | 1 |
| Drive Type | Magnetic Drive |
| Overall Height | 3.6 in |
| Discharge Standard | NPT |
| Flow Rate @ 100 psi | 4.4 gpm |
| Inlet Gender | Female |
| Manufacturer Part Number | 4KHK2 |
| California Prop 65 Reproductive Harm | Y |
| Flow Rate @ 25 psi | 4.8 gpm |
| California Prop 65 Warning Short Message Compliancy | Y |
| Inlet | 1/4 in FNPT |
| Discharge | 1/4 in FNPT |
| Operating Temperature - Minimum | -20 Degrees F |
| Gear Pump Type | External |
| Bushing Material | Cast Iron |
| Display Sell UOM | EA |
| Freight Class Code | 39 |
| Includes Relief Valve | No Relief Valve Included, No |
| Shaft Outer Diameter | 1/2 in |
| For Motor Frame Size | 56C |
| Inlet Standard | NPT |
| Should Sales be Restricted by Region? | N |
| Storage Protection Code | A |
| Suction Lift - Maximum | 3.5 ft |
| Overall Length | 6.1 in |
| Seal Type | Packing |
| Flow Rate @ 50 psi | 4.7 gpm |
| California Prop 65 Cancer | Y |
| Ports | 1/4" FNPT |
| Shaft Length | 2-3/8 in |
| Seal Material | PTFE |
| Shaft Material | Steel |
| Mfr. Model # | 4KHK2 |
Description
RotaryGearPmpHead, CI, 1/4"InletDia, 100psi