Rotary Gear Pump Head: Magnetic Drive, Cast Iron Body, 1/2" FNPT, 10.7 gpm, Pedestal
In Stock
$318.25
/each
Earn 318 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Rotary Gear Pump Head: Magnetic Drive, Cast I...
Item KD-1163184
$318.25
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2577 |
| Brand | DAYTON |
| Gear Material | Steel |
| Flow Rate @ 100 psi | 10.2 gpm |
| Gear Pump Type | External |
| Discharge Standard | NPT |
| Seal Type | Lip |
| Discharge Diameter | 1/2 in |
| Gear Design | Spur |
| Includes California Prop 65 Short-Form Warning | Y |
| Includes Relief Valve | No Relief Valve Included, No |
| Bushing Material | Cast Iron |
| Flow Rate @ 25 psi | 10.7 gpm |
| Flow Rate @ 50 psi | 10.6 gpm |
| Suction Lift - Maximum | 12.3 ft |
| Discharge Type | FNPT |
| Motor Mounting Type | Pedestal |
| Flow Rate @ 125 psi | 10.7 gpm |
| Storage Protection Code | A |
| Should Sales be Restricted by Region? | N |
| Ports | 1/2" FNPT |
| Inlet Type | FNPT |
| For Motor Speed - Maximum | 1,725 RPM |
| Freight Class Code | 39 |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Contains California Prop 65 Carcinogen | Y |
| Is this a Hazardous Material Product? | N |
| Shaft Length | 2-5/8 in |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Inlet Diameter | 1/2 in |
| Discharge Gender | Female |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Shaft Outer Diameter | 5/8 in |
| Inlet Gender | Female |
| O-Ring Material | Viton |
| Overall Length | 5.5 in |
| Drive Type | Magnetic Drive |
| Product Powered by Fossil Fuel | N |
| Body Material | Cast Iron |
| Manufacturer Part Number | 4KHJ7 |
| Operating Pressure - Maximum | 100 psi |
| Ozone Depleting Substance | N |
| Safety Data Sheet (SDS) Applicable? | N |
| Inlet | 1/2 in FNPT |
| Overall Height | 4 in |
| Display Qty | 1 |
| Flow Rate @ 75 psi | 10.5 gpm |
| Overall Width | 3.8 in |
| For Motor Frame Size | F56HC |
| Inlet Standard | NPT |
| Bushing / Bearing | Cast Iron Bushing |
| Operating Temp. Range | 32 Degrees F to 280 Degrees F |
| Viscosity - Maximum | 500 SUS |
| Operating Temperature - Minimum | 32 Degrees F |
| Series | B-Series |
| Discharge | 1/2 in FNPT |
| Feet of Head - Maximum | 230 ft |
| Required Horsepower | 1-1/2 hp |
| Seal Material | FKM |
| Shaft Material | Steel |
| Chemical Compatibility | Water, Diesel, Ethylene Glycol, Fuel Oil, Engine Oil |
| Display Sell UOM | EA |
| Operating Temperature - Maximum | 280 Degrees F |
| Mfr. Model # | 4KHJ7 |
Description
RotaryGearPmpHead, CI, 1/2"InletDia, 100psi